How to Manually Apply Tags
Dan Macarie avatar
Written by Dan Macarie
Updated over a week ago

Tags can be manually applied to each piece of content within the Curate > Content page.

You can apply one or more tags to any individual post or if you have several posts to tag, you can use the batch selection tool and batch apply the tags. You can apply tags to content regardless of whether the post is Trash, Queued, or Published.

Manually Apply a Tag

Nosto allows you to manually Add or Remove a Tag on any individual Tile within the Curate Content screen.

To do this, follow the instructions below:

  • Go to Curate > Manage Content

  • Find the Tile you wish to adjust the Tags on

  • Select the Edit Tags or Add Tags button

Screen_Shot_2019-04-08_at_2.45.21_PM.png

This will load the Expanded Tile view for the Tile where from the Right Hand side you can select what Tags to Add or Remove.

Screen_Shot_2018-03-14_at_1.57.51_pm.png

Once you have adjusted the Tags on the Tile, simply click Done or close the Expanded Tile view.

Batch Apply a Tag

Nosto allows you to Add or Remove a Tag(s) to up to 100 Tiles at any one time via the Curate Content screen.

To do this, follow the instructions below:

  1. Go to Curate > Manage Content

  2. Select the Tiles that you wish to apply the Batch Action to

  3. From the Batch Action list select Tag

Screen_Shot_2018-03-14_at_3.43.17_pm.png

From here you will be presented with a Modal where you can select to either Add or Remove Tags from your respective Tiles.

Screen_Shot_2018-03-14_at_3.43.59_pm.png

To do this, click on the respective drop-down, pick the Tags that you wish to Add or Remove, and then click the respective action button to the Right (either Add Tags or Remove Tags).

Note: You cannot Add and Remove Tags in the same click. You must complete one action first before starting the other.

For any further questions or queries, please send an email to support@nosto.com and our support team will get back to you.

Did this answer your question?